£425.00 £510.00 inc VAT
Single Skin Oil Tanks – 1100 Litre Steel Single Skin Home Heating Oil Tank – EXPRESS DELIVERY OPTIONS AVAILABLE ON THIS TANK, PLEASE CALL FOR DETAILS
Our 1100 Litre Steel Single Skin Heating Oil Tanks are made from mild steel and are ideal for home heating oil at family dwellings where a bunded fuel tank is not required. If there is any doubt about whether a bunded tank is needed for your premises, please contact OFTEC on www.oftec.org or on 0845 65 85 080.
Standard equipment includes a 1″ BSP (F) bottom outlet, 2″ BSP (M) top mounted fill point, a 1/2″ drain off point and a rear mounted 2″ vent. There is also optional equipment available at extra cost, like our RPM Fuels & Tanks-Tank Fitting Kit, Spin Secure Tank Lock and a Clock Type Oil Tank Contents Gauge. Please specify when ordering.
Important Information: Single Skin Oil Tanks
Single Skin Oil Tanks do not incorporate any form of secondary containment. Therefore, in the event of a spillage, a pollution incident will result. Consequently, consideration should always be given to installing a Bunded Oil Tank. Bunded storage tanks are proven to significantly reduce the likelihood of a pollution incident with all the corresponding clean-up costs and fines, in the event of an oil leak. Fitting a single skin fuel oil tank where a bunded tank is required is an offence.
Length | Width | Height | Nominal Capacity | Empty Tank Weighy |
1530mm | 610mm | 1220mm | 1100 Litres | 125 kg |
Mild Steel Thickness: 2mm – Thicker steel available upon request at extra cost.
Please note that all tank dimensions, weights and capacities are approximate
IF YOU ARE UNSURE WHETHER A BUNDED TANK IS REQUIRED PLEASE CONTACT YOUR LOCAL OFTEC REGISTERED ENGINEER OR CONTACT OFTEC ON 0845 65 85 080.
Weight | 125 kg |
---|---|
Dimensions | 153 × 61 × 122 cm |
Downloads | ppg2.pdf |
FAQs | Q. WHEN SHOULD A SINGLE SKIN OIL TANK NOT BE INSTALLED? A. All Single Skin Oil Tanks are generally unsuitable for storage of oil at any domestic installation where the tank: |
Description | Single Skin Oil Tanks – 1100 Litre Steel Single Skin Home Heating Oil Tank – EXPRESS DELIVERY OPTIONS AVAILABLE ON THIS TANK, PLEASE CALL FOR DETAILS |
Nominal Capacity | 1100 Litres |
The RPM Fuels & Tanks’ Tank Fitting Kit is the complete oil tank installation kit for the 1 inch bottom outlet on your heating oil tank
The Apollo Standard Oil Tank Gauge uses a high quality FM signal to send out the tank’s contents readings to the receiver. Never run out of oil again!
Watchman Alarm Oil Tank Gauge – Monitors oil tank contents and alerts you to a sudden drop in oil tank contents level, showing a possible oil theft or leak.
A low cost Clock Type Tank Contents Gauge to measure contents of your oil tank. Used with most domestic, agricultural & industrial fuels and oils.
Apollo Smart Heating Oil Monitor – To monitor heating oil tank content levels, check heating oil consumption, fuel costs and monitor CO2 emissions as well.
The Harlequin 650 ITE/ITT Bunded Heating Oil Tank is fully bunded and available with either a top (ITT) or bottom (ITE) outlet options.
The Carbery 1100RB Bunded Heating Oil Storage Tank is a rectangular, plastic oil tank that is ideal for the storage of heating oils at domestic homes.
The Carbery 1150H is a Plastic Single Skin Oil Tank that is ideal for use in home heating oil installations where a bunded tank is not required or commercial installations where a bund area is already in place.
Titan ES1300 Ecosafe plastic bunded oil tanks are designed to exceed current oil storage regulations & are one of the most advanced tanks available in the EU.
Reviews
There are no reviews yet.