1300 Litre Bunded Diesel Tank – Titan Fuel Master 1300 Advanced

Suitability: Diesel, Gas Oil and Agricultural Fuel Oil

Product Summary

Fully bunded and engineered to exceed the most demanding fuel storage requirements, the Titan FM1300 FuelMaster – Advanced is the ideal choice for commercial, industrial, agricultural and haulage businesses looking to store diesel, red diesel or gas oil safely and in an environmentally responsible manner. Complete with a fully lockable cabinet, a choice of 230-volt, 110-volt battery powered or hand operated diesel transfer pump, diesel delivery hose and an auto fuel delivery nozzle, the FM1300 exceeds all applicable UK and EU fuel storage tank requirements.

Manufactured from superior fuel resistant Polyethylene, Titan Bunded Fuelmasters fully comply with OFTEC’s OFS T100 standard, as well as the Environment Agency’s Pollution Prevention guidelines, PPG02.

Titan’s FM1300 Bunded Fuelmaster – Advanced from RPM Fuels and Tanks is a high strength tank that can immediately be used to store and dispense fuel.

Titan FM1300 Advanced Equipment Includes:

• Fully integrated fuel dispensing cabinet with lockable door
• Choice of 240v, 110v, 24v, 12v or rotary hand diesel transfer pump
• 6m length fuel resistant delivery hose with auto-shut off nozzle, designed to preveny unnecessary diesel spills
• 10 micron water & particle fuel filter – Not hand operated pump model
• Watchman Sonic Oil  Tank Contents Level Gauge
• Spillstop anti over filling device
• Flow meter – Not hand operated pump model
• 2” BSP Offset fill point
• Light inside lockable cabinet (240v & 110v models only)

Options

• 110v, 24v, 12v or rotary hand pump fuel dispensing options
• TMS Tank Monitoring System

Installation

To comply with the law, Titan Bunded Fuelmaster Diesel Storage and Dispensing Tanks must only be put in place by someone who is qualified to do this. It is important to put barriers around the tank, for safety reasons, to prevent machinery or vehicles crashing into the tank.

OFTEC and British Standard BS5410 require that all fuel and oil storage tanks should be installed upon a strong base that is at least 300mm longer than the dimensions of the tank. Only a qualified electrician should carry out electrical works on the tank, including the initial connection works.

RPM Fuels and Tanks and Titan Environmental Ltd will not be responsible for fuel tank installations that do not adhere to all the above rules and regulations.