10 Micron Water and Particle Diesel Fuel Filter (GP129300-02)15/01/2021
Harlequin 2525 HQi Bunded Oil Storage Tank (H2525HQi)10/07/2021
Cim-Tek Hydrosorb 10 Micron Water & Particle Filter (CT70062)
From: £36.95 £44.34 inc VAT
Cim-Tek Hydrosorb Water and Particle Diesel Filter – Filters diesel, gas oil & red diesel for water and particles down to 10 microns (CT70062).
Warning: Undefined variable $post_id in /home/customer/www/rpm-fuels.co.uk/public_html/wp-content/themes/creative-mon/functions.php on line 60
|Length, Complete Kit||280mm|
|Length, Cartridge Only||220mm|
|Width, Complete Kit||100mm|
|Width, Cartridge Only||95mm|
This Cim-Tek Hydrosorb Water and Particle Filter will filter diesel, gas oil and red diesel fuel for water and particles to 10 microns.
It can be purchased as a complete kit with 1″ BSP filter head and screw on cartridge, or replacement cartridges (CT70062) can be ordered on their own. The 10 micron element is identifiable as the part number CT70062 is usually printed on the side of the cartridge. The replacement filter cartridges are easy to remove and replace as they simply spin on and spin off the filter head.
The Cim-Tek Hydrosorb Fuel Filter is suitable for pumped diesel systems only, up to a maximum flow rate of 65 litres per minute and must be fitted on the outlet side ONLY, on a pumped diesel system.
- Water and particle filtration
- Particle filtration to 10 microns (70062)
- ONLY suitable for use with pumped diesel systems
- 1″ BSP inlet/outlets
- Maximum flow rate of 65 Litres/min.
- Maximum pressure of 50 psi (3.4BAR)
- Available as a kit (head plus element) or replacement filter cartridge only
- B100, 100% Biodiesel version available on request.
PLEASE NOTE THAT THESE CIM-TEK FILTRATION SYSTEMS MUST BE FITTED ON THE OUTLET SIDE OF ANY PUMPED DIESEL SYSTEM.
Cim-Tek Hydrosorb Water and Particle Filter – Filters diesel, gas oil & red diesel for water and particles to either 10 microns (CT70062) or 30 microns (CT70067).
|Cim-Tek Hydrosorb Water & Particle Filter|
|Length, Complete Kit|| |
|Length, Cartridge Only|| |
|Width, Complete Kit|| |
|Width, Cartridge Only|| |
- From: £18.50 £22.20 inc VAT
The Golden Rod Fuel Tank Filter is the ideal diesel filtration solution for gravity feed and pumped systems with a fuel flow rate of up to 60 litres per minute.
- From: £21.95 £26.34 inc VAT
The 550 micron brass inline Y filter fits on the inlet or suction side of your pump and helps filter out most particulates, protecting your pump & machinery.
- £25.00 £30.00 inc VAT
The RPM Fuels & Tanks’ Tank Fitting Kit is the complete oil tank installation kit for the 1 inch bottom outlet on your heating oil tank
- £27.95 £33.54 inc VAT
Great Plains Industries’ 10 Micron Replacement Diesel Filter is a cost effective solution for those looking to filter diesel fuel for both water & particles.