Golden Rod Fuel Tank Filter14/03/2016
Brass Inline Y Filter14/03/2016
Cim-Tek Hydrosorb 30 Micron Water & Particle Filter CT70067
From: £34.95 £41.94 inc VAT
Cim-Tek Hydrosorb Water and Particle Diesel Filter – Filters diesel, gas oil & red diesel for water and particles down to 30 microns (CT70067).
|Length, Complete Kit||280mm|
|Length, Cartridge Only||220mm|
|Width, Complete Kit||100mm|
|Width, Cartridge Only||95mm|
As part of the Cim-Tek 260 Series the Cim-Tek Hydrosorb Water and Particle Filter is a 1″ BSP filter that will filter diesel, gas oil and red diesel fuel for water and particles to 30 microns (CT70067).
The Cim-Tek Hydrosorb Filter can be had as a complete kit with 1″ BSP filter head and screw on cartridge or replacement cartridges can be ordered on their own. The 30 micron element is identifiable by the part number CT70067, usually printed on the side of the cartridge. The replacement filter cartridges are easy to remove and replace as they simply spin on and spin off the filter head.
The Cim-Tek Hydrosorb Fuel Filter is suitable for pumped diesel systems only, up to a maximum flow rate of 65 litres per minute and must be fitted on the outlet side ONLY, on a pumped diesel system.
- Water and particle filtration
- Particle filtration to 30 microns (70067)
- ONLY suitable for use with pumped diesel systems
- 1″ BSP inlet/outlets
- Maximum flow rate of 65 Litres/min.
- Maximum pressure of 50 psi (3.4BAR)
- Available as a kit (head plus element) or replacement filter cartridge
- B100, 100% Biodiesel version available on request.
PLEASE NOTE THAT THESE CIM-TEK FILTRATION SYSTEMS MUST BE FITTED ON THE OUTLET SIDE OF ANY PUMPED DIESEL SYSTEM.
Cim-Tek Hydrosorb Water and Particle Filter – Filters diesel, gas oil & red diesel for water and particles to either 10 microns (CT70062) or 30 microns (CT70067).
|Cim-Tek Hydrosorb Water & Particle Filter|
|Length, Complete Kit|
|Length, Cartridge Only|
|Width, Complete Kit|
|Width, Cartridge Only|
Prolube fuel filter – All round filter for diesel fuel and biodiesel. Available as a complete kit or just a replaceable filter element at competitive prices.From: £19.50 £23.40 inc VAT
- £25.00 £30.00 inc VAT
The RPM Fuels & Tanks’ Tank Fitting Kit is the complete oil tank installation kit for the 1 inch bottom outlet on your heating oil tank
The 550 micron brass inline Y filter fits on the inlet or suction side of your pump and helps filter out most particulates, protecting your pump & machinery.From: £21.95 £26.34 inc VAT
- £95.00 £114.00 inc VAT
10 Micron water & particulate filter option for use with Harlequin’s Fuel Points and Fuel Stations.