Harlequin 1100 Litre Slimline Potable Water Tank (PW1100SL)13/03/2016
Harlequin 1200LP Single Skin Oil Tank (1200LP)13/03/2016
1100SL Product Summary:
This 1100-litre slimline aboveground water storage tank is suitable for storing potable and non-potable water and to be used for agricultural, domestic, commercial or industrial purposes. Harlequin single skin bottom outlet oil tanks are for use with home heating oil at family homes. They can only be used where a bunded oil tank is not required, subject to a full site survey by an Oftec registered engineer. If in any doubt please contact Oftec on www.oftec.org or on 0845 65 85 080
HARLEQUIN SINGLE SKIN OIL STORAGE TANKS ARE FOR USE IN DOMESTIC, HOME HEATING OIL SITUATIONS AND SHOULD ONLY BE USED WHEN A BUNDED OIL TANK IS NOT NECESSARY.
1100SL TECHNICAL DETAILS:
|Nominal Capacity||1100 Litres|
|Actual Capacity||1095 Litres|
- 2″ BSP Lockable Fill Point with Cap and Chain
- 4″ Inspection Point with Plastic Screw Cap
- 2″ Vent
- 1″ BSP Bottom Outlet
- Oil Tank Contents Dipstick
Please note that this single skin oil tank is designed for the storage of heating oil, where applicable under statatury requirements, and is NOT suitable as a gravity feed vehicle fueling system. For the re-fuelling of vehicles please see our Harlequin bunded Fuel Point, bunded Fuel Station and bunded bio-Fuel Station ranges.
Important Information: Single Skin Oil Tanks
Single Skin Oil Tanks do not incorporate any form of secondary containment. Therefore in the event of a spillage, a pollution incident will result. Consideration therefore should always be given to installing a Bunded Oil Tank. Bunded oil storage tanks are proven to significantly reduce the likelihood of a pollution incident, with all the corresponding clean up costs and fines, in the event of an oil leak. Fitting a single skin fuel oil tank where a bunded tank is require is an offence.
All oil tanks must be installed, and all maintenance carried out by, an Oftec registered engineer in accordance with the supplied instructions, statutory requirements and the requirements of Oftec Technical Book 3. OFTEC and British Standard BS5410 require that all fuel and oil storage tanks should be installed upon a base of adequate strength that extends a minimum of 300mm beyond the maximum dimensions of the tank.
RPM Fuels & Tanks will not be responsible for oil tank installations which do not comply with these requirements and where a single skin oil tank has been installed where a bunded tank is a legal requirement.
- Various Installations – Can be used for agricultural, domestic, commercial or industrial premises.
- KIWA & WRAS Approved – All Harlequin potable water tanks have been confirmed to comply with UK Water Supply Regulations 1999, Water Byelaws 2004 Scotland and Water Supply Regulations (Northern Ireland).
- Non Corrosive – manufactured from Medium Density Polyethylene (MDPE), Harlequin tanks will never corrode.
- Protection against Sunlight – They are manufactured from UV stabilised polymer protecting the tank against potentially damaging effects of sunlight.
- Slimline & Low Profile Options – For more awkward installations, slim and low to ground tank options are available.
|Dimensions||165 × 69 × 142 cm|
Q. WHEN SHOULD A SINGLE SKIN OIL TANK NOT BE INSTALLED?
All Single Skin Oil Tanks are generally unsuitable for storage of oil at any domestic installation where the tank:
A. Why does the tank base have to measure 300mm around the perimeter of the oil tank?
The fire protection provided by the base is to help prevent the tank itself from becoming overgrown and in turn to help protect against fire spreading across the ground to the contained fuel from another source. If the tank is raised on piers, the platform supporting the tank should be sized to sufficiently support the tank. Reference should be made to the tank manufacturer’s installation instructions.
Has a capacity of more than 2500 Litres.
Q. What fuel types can be stored in Harlequin oil tanks?
A. Harlequin Oil Tanks are suitable only for the storage of:
Harlequin single skin bottom outlet oil tanks are for use as home heating oil tanks at family homes.
|Nominal Capacity|| |
|Actual Capacity|| |
- £595.00 £714.00 inc VAT
Single Skin Oil Tanks – This 1100 Litre Steel Single Skin Oil Tank is ideal for the storage of heating oil, where a bunded tank is not required.
- £1,849.00 £2,218.80 inc VAT
Titan ES1300 Ecosafe plastic bunded oil tanks are designed to exceed current oil storage regulations & are one of the most advanced tanks available in the EU.
- £2,650.00 £3,180.00 inc VAT
Bunded Oil Tanks – This 2000 Litre Steel Bunded Oil Tank is ideal for domestic heating oil storage and it can be used in commercial properties as well
- £1,999.00 £2,398.80 inc VAT
The Harlequin 2525HQi Plastic Bunded Oil Storage Tank – the ideal fuel storage solution for small, commercial premises and larger domestic properties as well.