Harlequin 3500 ITE/ITT Bunded Oil Storage Tank

Product Summary

The Harlequin 3500 ITE/ITT Bunded Tank is a high-capacity, highly functional heating oil storage solution that is perfect for a range of installations including commercial, agricultural as well as larger domestic situations. The tank surpasses all current UK and EU compliance regulations, including the Environment Agency’s Pollution Prevention Guidelines PPG02, for complete peace of mind and superior environmental protection.

The 3500 ITE has a fully enclosed bund, acting like a tank within a tank, providing vital security in the event of an inner tank leak or breach. The construction, from superior grade oil resistant medium density polyethylene, is very strong and offers a robust finish that can withstand heavy use. The tank is available with either a 1″ BSP F bottom mounted boiler feed outlet or a top mounted 15mm outlet. However, it is worth noting that top outlet oil tanks are usually only suitable where a pressure jet boiler or oil lifting equipment is installed. If you are unsure if a top outlet oil tank is suitable for your circumstances, it is important to contact the boiler manufacturer or your local boiler engineer for advice.

Offering fully enclosed bunded construction for added protection, this tank is a solid choice that surpasses all UK and EU compliance regulations. If you’re looking for a strong and useful tank for long-term use, the Harlequin 3500 ITE/ITT Bunded Oil Storage Tank is an excellent choice.

THE HARLEQUIN 3500 ITE/ITT MAIN FEATURES ARE AS FOLLOWS:

• 2″ BSP lockable fill point (with dust cap to prevent dust and dirt getting in)
• 4” lockable inspection hatch with a 1/4 turn screw cap
• 2” internal vent
• Dipstick to measure contents
• Electronic oil tank contents monitor, for remote monitoring
• LRC failsafe oil overfill protector
• Fully lockable Manway access
• ITB Bottom Outlet Bunded Oil Tanks come with:
• A 1” BSP bottom outlet
• A bottom outlet tank fitting kit
• ITT Top Outlet Bunded Oil Tanks come with:
• Atkinson ‘Tank Top’ Top Outlet Feed System. (This is made up of a floating suction line, anti-syphon valve, non-return valve (also known as a one-way valve), self-priming button, filter with replaceable element, and of the option of either compression or push fit oil line connectors).
• External hatch tank with spin secure lock
• Harlequin 100db alarm lock
• Alert system in the event of any oil loss
• An oil tank sticker to indicate that the tank is alarmed

RPM Fuels & Tanks will not be responsible for oil tank installations which do not comply with these requirements.

All oil tanks must be installed, and all maintenance carried out by, an OFTEC registered engineer in accordance with the supplied instructions, statutory requirements and the requirements of OFTEC Technical Book 3. OFTEC and British Standard BS5410 require that all fuel and oil storage tanks should be installed upon a base of adequate strength that extends a minimum of 300mm beyond the maximum dimensions of the tank.