TITAN ES2500 EcoSafe Plastic Bunded Oil Tank (ES2500)
11/03/2016Harlequin 1000 Litre Bunded Oil Tank (1000ITE)
12/03/2016Harlequin 650 ITE/ITT Bunded Heating Oil Tank (650ITE)
£1,309.00 £1,570.80 inc VAT
The Harlequin 650 ITE/ITT Bunded Heating Oil Tank is fully bunded and available with either a top (ITT) or bottom (ITE) outlet options.
650 ITE PRODUCT SUMMARY:
This 650-litre capacity slimline environment friendly bunded oil tank is suitable for the storage of heating oil in a domestic or commercial set up. Its available in HQi, ITE & ITT models. The Harlequin 650 ITE/ITT Bunded Heating Oil Tank is a fully bunded oil tank solution that offers superior safety on all installations. Designed for use at small, domestic dwellings, it’s a tough and durable oil storage tank and exceeds all applicable EU and UK compliance regulations and has been engineered to deal specifically with storing heating oil.
Perfect for heating oil storage on above ground installations this tank has been specifically designed for use at domestic premises but can also be used for the storage of fuels and oils at agricultural, commercial and industrial premises too. The 650 ITE comes fully equipped with a full range of equipment and features to allow efficient and trouble free installation and operation. It comes with a choice of top (ITT) or bottom (ITE) mounted oil feed outlet, an electronic remote oil tank contents gauge, 2″ fill point plus lockable 4″ inspection aperture, LRC anti-overfill prevention device plus “THIS TANK IS ALARMED” tank sticker to help deter oil tank theft. All equipment is contained within a small, fully lockable tank security cabinet located on top of the tank.
All-in-all the Harlequin 650ITE is the ideal bunded oil tank for the secure and environmentally safe storage of home heating fuel at domestic premises.
Top Outlet Bunded Heating Oil Tank:
Harlequin’s ITT top outlet bunded oil tanks are only suitable where a pressure jet boiler or oil lifting equipment is installed. If you have any doubts about the compatibility of a top outlet bunded oil tank and your appliance then please contact the boiler manufacturer or your local boiler engineer.
650 ITE TECHNICAL DETAILS:
Length | 1715mm |
Width | 650mm |
Height | 1355mm |
Dry Weight | 105 kg |
Actual Capacity | 679 Litres |
Nominal Capacity | 645 Litres |
FEATURES:
- 2″ BSP lockable fill point with dust cap
- 4” lockable inspection aperture with plastic 1/4 turn screw cap
- 2” internal vent
- Tank contents dipstick
- Wireless electronic fuel tank gauge that can transmit upto 200 metres with good clear line-of-sight.
- LRC Failsafe Overfill Prevention Capability
- Fully lockable Manway access
- ITE Bottom Outlet Bunded Oil Tanks come with: one inch BSP bottom outlet complete with a bottom outlet tank fitting kit
- ITT Top Outlet Bunded Oil Tanks come with: Atkinson ‘Tank Top’ Top Outlet Feed System consisting of a floating suction line, non-return valve, filter with replaceable element, anti-syphon valve, self priming button and choice of compression or push fit oil line connections
- Spin secure External hatch tank lock
- Harlequin 100db audible alarm lock
- Alert system warning of sudden oil loss from theft or leakage
Key Benefits:
- Integrally Bunded – Designed to protect the surrounding environment, all tanks are bunded preventing pollution if the internal tank was ever to leak. A bunded heating oil tank simply consists of a tank within a tank. Heating oil is stored in the inner tank and the outer tank acts as a fail safe so that in the event of a spillage, excess fuel will collect in the outer tank.
- Durable & Stable – Manufactured from Medium Density Polyethylene (MDPE) material, Harlequin tanks are the most durable and stable heating oil tanks you will find. Our tanks will never corrode.
- 10 Year Conditional Warranty* – Our bunded oil tanks come with a 10 year warranty giving you peace of mind for a generation. So should an issue arise with your tank, Harlequin will be there to help. *10 year warranty only when product is registered on our website.
- Meets Oil Storage Regulations – Apart from being fully bunded, each tank meets all relevant current regulatory requirements for storage of heating oil.
- Contents Monitoring – Each model has a 32mm hole suitable for fitting an electronic gauge. Electronic Gauge is standard only with ITE and ITT models.
- Wide Range of Options – The full range includes 20 options, a tank to suit every installation requirement.
Please note that this Harlequin 650ITE Bunded Oil Tank is specifically designed for the storage of heating oil and is NOT suitable for use as a gravity feed tank for refueling vehicles or machinery. For the re-fuelling of vehicles please see our Harlequin bunded Fuel Point, Bunded Fuel Station or Harlequin Bunded Bio-Fuel Station ranges.
Downloads:
Weight | 105 kg |
---|---|
Dimensions | 171.5 × 65 × 135.5 cm |
FAQs | Q. Why does the tank base have to measure 300mm around the perimeter of the oil tank? A. The fire protection provided by the base is to help prevent the tank itself from becoming overgrown and in turn to help protect against fire spreading across the ground to the contained fuel from another source. If the tank is raised on piers, the platform supporting the tank should be sized to sufficiently support the tank. Reference should be made to the tank manufacturer’s installation instructions. Q. What is the life expectancy of an oil storage tank? A. Most plastic bunded oil tanks come with a 10 year manufacturers’ warranty and when properly installed and maintained can last for many years beyond its expiration date. Fuel pumping and tank equipment usually comes with the standard manufacturers 1 year warranty. The tanks that are available at RPM Fuels and Tanks are constructed using the best base materials and the most reliable fittings to ensure you’re provided with the best possible oil storage solution. Q. What is a bunded tank? A. A bunded oil tank is simply a tank within a tank, with fuel being stored within the inner tank. The reason behind the design is to ensure that there is no fuel loss due to the occurrence of a spill or like for like incident. The outer tank not only provides you with a failsafe it can also avert any pollution incidents. Bunded oil tanks are a requirement at commercial, industrial, institutional and commercial premises and at most domestic installations in the United Kingdom and Republic of Ireland. |
Outlets | |
Description | The Harlequin 650 ITE/ITT Bunded Heating Oil Tank is fully bunded and available with either a top (ITT) or bottom (ITE) outlet options. |
Actual Capacity | 679 Litres |
Nominal Capacity | 645 Litres |
Related products
-
Titan ESSL1400 Slimline EcoSafe Bunded Oil Tank (ESSL1400)
£1,909.00 £2,290.80 inc VATThe NEW Titan ESSL1400 is a slimline plastic bunded oil tank that is ideally suited to properties with limited space and where access is restricted.
-
Titan 1000 Litre Bunded Oil Tank (ES1000)
£1,699.00 £2,038.80 inc VATPlastic Bunded Oil Tanks – The advanced Titan ES1000 Ecosafe bunded oil storage tank is specifically designed to exceed all current oil storage regulations.
-
Harlequin 2500 ITE/ITT Bunded Oil Storage Tank (2500ITE)
£1,939.00 £2,326.80 inc VATThe Harlequin 2500 ITE/ITT Bunded Oil Storage Tank offers strength and functionality in domestic heating oil situations and light commercial & industrial uses.
-
Titan ESV2500 Ecosafe Bunded Oil Tank (ESV2500)
£2,019.00 £2,422.80 inc VATThe Titan ESV2500 Ecosafe is a plastic bunded oil storage tank to enable householders and small commercial premises to store heating oil safely & securely.
Reviews
There are no reviews yet.