Piusi BP3000 12 or 24 Volt DC Transfer Pump

The Piusi BP3000 is a battery operated 12 or 24 volt DC diesel transfer pump which has a more efficient motor and a higher delivery pressure than the Piusi By Pass 2000 Diesel Pump it replaces.

It is available as a pump only with a choice of either vertical “push on” ports or with horizontal “push on” or threaded ports and can be had with a variety of port hosetails or flanged ports. It is capable of up to 50 litres per minute diesel flow rate and is the ideal solution for refuelling plant & machinery “on the go” in the agricultural, construction, marine, groundcare and commercial industries.

It can also be purchased as a BP3000 Carry Pump complete with carry handle, on/off switch plus 2 or 4 metres of electrical cables with clips. There is also the excellent Piusi BP3000 Diesel Transfer Pump Kit which comes complete with low voltage pump, suction & delivery hose, electrical cables plus a manual diesel nozzle.

All-in-all the BP3000 is the ideal ‘ready to go’ diesel refueling solution for diesel, gas oil and red diesel.

Technical Features

• 12 or 24 volt rotary vane type pump capable of up to 50 litres/min.
• Self-priming diesel transfer pump, with cast-iron body finished in weather resistant paint.
• Easily accessible by pass valve in fuel pump body
• Vertical, 3/4″ “push fit” inlet and outlet ports OR
• Horizontal, 3/4″ “push fit” or BSP threaded inlet/outlet ports
• IP55 weather proofing rated
• Pump bracket for attaching to machinery

Please note these pumps have a duty cycle or run time of a maximum of 30 minutes, then they should rest for a minimum of 60 minutes.

Accessories for PUMP ONLY model (please specify when ordering):

• 3/4″ straight hose tails
• 3/4″ 90 degree elbow hose tails
• 1″ BSP 90 degree elbow flanged hose tails
• 2 or 4 metre electrical cables with clips and on/off switch

Pump Motor