Piusi EX50 12 Volt Petrol Transfer Pump Kit (ATEX Approved)

The Piusi EX50 Petrol Transfer Pump Kit is a 12volt, battery operated fuel transfer kit that comes complete with 12 volt fuel transfer pump, 4 metres of fuel delivery hose, an auto shut off fuel nozzle, 30 micron water & particle fuel filter and a telescopic suction tube. The EX50 Pump Kit also contains a 2″ drum or barrel connector that comes with a nozzle holster with on/off switch, check valve to prevent fuel dropping back into the fuel container, so keeping the pump primed, and a basic 100 micron fuel filter.

Being fully ATEX approved the Piusi EX50 is particularly suited to the transfer or dispensing of petrol and kerosene but it is also perfectly suitable for the transfer of diesel, gas oil, red diesel and tractor fuel. It can transfer these liquids at a fuel flow rate of up to 50 litres per minute under optimum conditions.

Being a 12 volt fuel transfer pump the Piusi EX50 is fully mobile and can be transferred from site to site or job to job very easily. Also with it’s 2″ drum connector it can be quickly and easily installed on to a drum or barrel or any fuel storage vessel with a 2″ BSP connection with a female thread.

PLEASE NOTE THAT THE PIUSI EX50 DOES NOT COME WITH ELECTRICAL CABLES & “CROCODILE” CLIPS AS A FULL RISK ASSESMENT NEEDS TO BE CARRIED OUT REGARDING POWER SUPPLY TO THE PUMP

PRODUCT SUMMARY:

• 12 Volt, ATEX Approved petrol transfer pump
• Fully explosion proof
• Comes as a complete kit with pump, fuel hose, nozzle, fuel filter, 2″ barrel connector and suction pipe
• Suitable for the dispensing of petrol and kerosene
• Can also be used to transfer diesel fuel
• Capable of up to 50 litres/min flow fuel flow rate
• 1″ F BSP inlet & outlet ports
• Maximum run time 30 minutes
• Comes with pressure relief valve, check valve and integral bypass valve
• ATEX Approved, explosion proof