1100 Litre Steel Single Skin Heating Oil Storage Tank09/03/2016
Steel 2500 Litre Single Skin Heating Oil Tank09/03/2016
Steel 1350 Litre Single Skin Oil Storage Tank
£645.00 £774.00 inc VAT
Single Skin Oil Tanks – This 1350 Litre Steel Single Skin Oil Tank is ideal for the storage of home heating oil, where a bunded tank is not required.
Product Summary :
Manufactured from mild steel, our 1350 Litre Steel Single Skin Heating Oil Tanks are an excellent choice for home heating oil storage at domestic properties where there is not a requirement for a bunded fuel tank.
The oil tank includes a 1″ BSP (F) bottom outlet, 2″ BSP (M) top mounted fill point, a 1/2″ drain off point and a rear mounted 2″ vent as standard. When placing your order, you also have the chance to purchase optional extras such as our RPM Fuels & Tanks-Tank Fitting Kit, an Oil Tank Contents Gauge with Clock Type Reader, and a Spin Secure Tank Lock.
Vital Information: Single Skin Oil Tanks
Single Skin Oil Tanks do not have a protective outer layer. This means that should an oil spillage occur, this will lead to a pollution incident. It is therefore important to consider whether a Bunded Oil Tank is required. Bunded oil tanks are well-known to substantially reduce incidents of oil leakage or spills, which can result in fines and clear-up costs. It is against the law to fit a single skin fuel tank in circumstances when a bunded tank is needed.
TANK DIMENSIONS, WEIGHTS AND CAPACITIES:
|Length||Width||Height||Nominal Capacity||Dry Weight|
|1830mm||610mm||1300mm||1350 Litres||125 kg|
Mild Steel Thickness: 2mm – Thicker steel is available for an additional cost.
It is important to note that all tank measurements, weights and capacities are approx. only
STANDARD TANK SPECIFICATION INCLUDES:
- 2″ BSP Fill Point with Cap and Chain
- 2″ Vent
- 1/2″ drain
- Choice of 1″ BSP Top or Bottom Outlet
IF THERE IS ANY DOUBT ABOUT WHETHER YOU NEED A BUNDED TANK, PLEASE GET IN TOUCH WITH YOUR LOCAL OFTEC REGISTERED ENGINEER OR CONTACT OFTEC ON 0845 65 85 080.
|Dimensions||183 × 61 × 130 cm|
Single Skin Oil Tanks – 1350 Litre Steel Single Skin Heating Oil Tank – EXPRESS DELIVERY OPTIONS AVAILABLE ON THIS TANK, PLEASE CALL FOR DETAILS
You may also like…
£69.95 £83.94 inc VAT
The Apollo Standard Oil Tank Gauge uses a high quality FM signal to send out the tank’s contents readings to the receiver. Never run out of oil again!
£115.00 £138.00 inc VAT
The Watchman oil tank alarm uses ultrasonic measurement to continually measure the oil tank level to help prevent fuel theft. A transmitter sets off an alarm when there is a sudden drop.
£24.95 £29.94 inc VAT
A low cost Clock Type Tank Contents Gauge to measure contents of your oil tank. Used with most domestic, agricultural & industrial fuels and oils.
£89.95 £107.94 inc VAT
Watchman Sonic Oil Level Monitor – The Watchman Sonic is one of the award-winning Watchman tank monitoring range from Kingspan. It acts as a level sensor to indicate how much home heating oil is left in your oil tank. This helps you to ensure that you never run out of oil.
£25.00 £30.00 inc VAT
The RPM Fuels & Tanks’ Tank Fitting Kit is the complete oil tank installation kit for the 1 inch bottom outlet on your heating oil tank
£895.00 £1,074.00 inc VAT
Harlequin single skin bottom outlet oil tanks are for use as home heating oil tanks at family homes.
£2,650.00 £3,180.00 inc VAT
Bunded Oil Tanks – This 2000 Litre Steel Bunded Oil Tank is ideal for domestic heating oil storage and it can be used in commercial properties as well
£1,999.00 £2,398.80 inc VAT
The Harlequin 2525HQi Plastic Bunded Oil Storage Tank – the ideal fuel storage solution for small, commercial premises and larger domestic properties as well.
£825.00 £990.00 inc VAT
The Harlequin 1400HZ Single Skin Oil Tank is ideal for home heating oil at family homes where a bunded tank is not required.