Steel 1350 Litre Single Skin Oil Storage Tank09/03/2016
1000 Litre Bunded Oil Tank – Titan ES100009/03/2016
EXPRESS DELIVERY OPTIONS ARE AVAILABLE ON THIS TANK, PLEASE CALL FOR DETAILS
This 2500 Litre Steel Single Skin Oil Tank has been made from 2mm thickness mild steel and finished in a red oxide primer with a thick gloss top coat of paint. However thicker steel can be specified at extra cost if required, just contact us for more information.
Other features of this home heating oil tank include a 1 inch BSP (Female) bottom mounted socket outlet, 2 inch BSP (Male) top mounted fill point, a 2 inch tank vent with weather cowl plus a ½ inch rear mounted drain off point from which water and contaminates can be drained off if required. Optional equipment can also be specified when ordering this tank such as the RPM Fuels & Tanks-Tank Fitting Kit, Spin Secure Tank Lock and a Clock Type Contents Gauge Please specify which extra cost options you require when ordering.
Steel single skin oil tanks are for use with home heating oil at family homes only. They can only be used where there is not a need for a bunded oil tank, subject to a full site survey by an Oftec registered engineer.
Single Skin Oil Tanks
It is important to note that Single Skin Oil Tanks do not have the extra layer of protection provided by a bunded oil tank. On the contary, bunded tanks are known to be a safer option as they reduce the likelihood of an oil spillage or pollution incident which could result in subsequent fines and clean-up costs. If you are not sure if you can use a single skin tank on your premises, it is essential to contact OFTEC on www.oftec.org or on 0845 65 85 08.
APPROX. TANK DIMENSIONS, WEIGHTS AND CAPACITIES:
|Length||Width||Height||Nominal Capacity||Dry Weight|
|1830mm||1220mm||1300mm||2500 Litres||200 kg|
Mild Steel Thickness: 2mm – Just contact us if you require thicker steel for an additional price.
STANDARD TANK SPECIFICATION INCLUDES:
- 2″ BSP Fill Point with a Cap that is fitted with a chain
- 2″ Vent with Weather-Proof Cowl
- 1/2″ drain
- Choice of 1″ BSP Top or Bottom Outlet
|Dimensions||183 × 122 × 130 cm|
Single Skin Oil Tanks – This 2500 litre Steel Single Skin Oil tank: EXPRESS DELIVERY OPTIONS AVAILABLE ON THIS TANK, PLEASE CALL FOR DETAILS.
You may also like…
A low cost Clock Type Tank Contents Gauge to measure contents of your oil tank. Used with most domestic, agricultural & industrial fuels and oils.£24.95 £29.94 inc VAT
- £64.95 £77.94 inc VAT
The Apollo Standard Oil Tank Gauge uses a high quality FM signal to send out the tank’s contents readings to the receiver. Never run out of oil again!
- £25.00 £30.00 inc VAT
The RPM Fuels & Tanks’ Tank Fitting Kit is the complete oil tank installation kit for the 1 inch bottom outlet on your heating oil tank
- £95.95 £115.14 inc VAT
Watchman Alarm Oil Tank Gauge – Monitors oil tank contents and alerts you to a sudden drop in oil tank contents level, showing a possible oil theft or leak.
- £550.00 £660.00 inc VAT
Single Skin Oil Tanks – 1350 Litre Steel Single Skin Heating Oil Tank – EXPRESS DELIVERY OPTIONS AVAILABLE ON THIS TANK, PLEASE CALL FOR DETAILS
- £1,012.95 £1,215.54 inc VAT
The Carbery 1000SB Superslim Bunded Oil Tank is a super slimline oil storage tank that at only 650mm wide is designed to easily fit through a standard doorway.
- £545.00 £654.00 inc VAT
The Harlequin 1200LP Single Skin Oil Tank is ideal for use with home heating oil in family homes and dwellings where a bunded oil tank is not required.
- £1,050.00 £1,260.00 inc VAT
Buy 1050 Litre Steel Bunded Oil Tank – RPM Fuels & Tanks is a quality supplier of bunded steel fuel tanks, throughout the UK, with 24 or 48 hour delivery.