Unitel Hydrostatic Oil Tank Gauge
14/03/2016
Piusi Fuel Tank Filter – 60 Litres Per Minute
14/03/2016
RPM Fuels & Tanks-Tank Fitting Kit
£25.00 £30.00 inc VAT
The RPM Fuels & Tanks’ Tank Fitting Kit is the complete oil tank installation kit for the 1 inch bottom outlet on your heating oil tank
10 in stock
The RPM Fuels & Tanks-Tank Fitting Kit is the complete oil tank installation kit for the 1 inch bottom outlet on your heating oil tank.
This tank fitting kit comprises of an isolation valve plus a filter element with removable filter bowl, 1″ BSP male fitting for your tank, boiler feed pipe compression fitting and even comes with some PTFE tape.
The RPM Fuels & Tanks-Tank Fitting Kit is ideal for heating oil users looking to connect the bottom outlet on their heating oil tank to the oil supply pipe to their boiler.
TANK FITTING KIT SUMMARY:
- Isolation valve
- Heating oil fuel filter assemby
- 1″ BSP to 1/2” male tank adaptor
- Pipe insert
- PTFE tape
A Tank Isolation Valve is also available for this product as a cost option, so the tank engineer woun’t have to fully drain the tank to carry out any works.
| Weight | 0.00000000 kg |
|---|---|
| FAQs | Q. Does the RPM Fuels & Tanks Bottom Outlet Fitting Kit have an isolation valve? A. Yes the fitting kit comes complete with a 1/4 turn isolation or shut off valve so maintenance can be carried out on the fitting kit or supply pipe even when your heating oil tank is full of oil. The Full specification of the RPM Fuels & Tanks Tank Fitting Kit includes: Isolation valveFilter assemby with filter element Does the RPM Fuels & Tanks Tank Fitting Kit come with a filter? The RPM Fuels & Tanks Tank Fitting Kit comes complete with a fully replaceable 50 micron heating oil filter or strainer. Alternatively the filter can be washed with clean kerosene or paraffin and replaced. However RPM Fuels & Tanks always recommends a complete renewal of the strainer to prevent any problems with your heating fuel supply. The Full specification of the RPM Fuels & Tanks Tank Fitting Kit includes Isolation valve & filter assemby with fully repaceable 50 micron fuel filter element Is there a difference between the types of tanks? Yes, there are lots of differences between the types of oil storage tanks and these are also available in a variety of sizes. • Single skin tanks (non bunded) are used more in residential situations rather than commercial. However, a bunded version may be required in a residential situation dependant on the results of a risk assessment, to prevent any pollution from occurring. |
| Description | The RPM Fuels & Tanks’ Tank Fitting Kit is the complete oil tank installation kit for the 1 inch bottom outlet on your heating oil tank |
Related products
Great Plains Industries Diesel Filter – Kit
£46.95 £56.34 inc VAT10 Micron Diesel Fuel Filter – Filters diesel for water & particles down to 10 microns, so only clean fuel is dispensed into vehicles & machinery tanks.
Golden Rod Fuel Tank Filter
The Golden Rod Fuel Tank Filter is the ideal diesel filtration solution for gravity feed and pumped systems with a fuel flow rate of up to 60 litres per minute.
From: £18.50 £22.20 inc VATBrass Inline Y Filter
The 550 micron brass inline Y filter fits on the inlet or suction side of your pump and helps filter out most particulates, protecting your pump & machinery.
From: £21.95 £26.34 inc VATProlube Diesel Fuel Filter
Prolube fuel filter – All round filter for diesel fuel and biodiesel. Available as a complete kit or just a replaceable filter element at competitive prices.
From: £19.50 £23.40 inc VAT
Reviews
There are no reviews yet.